Search Results | Clear Search | Previous (in doc) | Next (in doc) | Prev Doc | Next Doc
B.C. Reg. 97/88
O.C. 506/88
Deposited March 28, 1988
This archived regulation consolidation is current to April 21, 2006 and includes changes enacted and in force by that date. For the most current information, click here.

Assessment Act

Exemption from Industrial
improvements Regulation

[includes amendments up to B.C. Reg. 81/2005, March 18, 2005]

Exemptions

1The industrial improvements in plants or classes of plants described in column 1 of the following Table that have less than the capacities set out opposite them in column 2 are exempt from the definition of "industrial improvements" in section 20 of the Act.

Table

Column 1
Plant
Column 2
Capacity
Placer mines 500 m3 pay dirt per day
Mines, other than coal mines or placer mines 75 tonnes milling capacity per day or no milling capacity
Sawmills that manufacture lumber and other wood products from raw logs 15 million fbm per year based on 480 shifts a year of 8 hours each shift
Remanufacturing plants, not part of a sawmill, which manufacture lumber or other wood products from rough lumber or cants, but not raw logs 300 million fbm per year based on 480 shifts a year of 8 hours each shift
Chemical plants 5 000 tonnes per year
Building, refitting or repairing ships 750 tonnes light displacement weight retrieval capacity or no retrieval capacity
Specialty veneer value-added remanufacturing plants which are not part of primary veneer processing plants (i.e., where veneer is produced by peeling or slicing raw logs or flitches) 250 million sq. ft. 3/8" basis, based on 480 shifts a year of 8 hours each shift

[am. B.C. Regs. 473/92; 329/2002; 460/2003; 81/2005.]

[Provisions of the Assessment Act, R.S.B.C. 1996, c. 20, relevant to the enactment of this regulation: section 20]